Counterfeit auto parts can rarely be confirmed from the box or the look of the part. At the workshop door, three checks work together: the invoiced channel, the approval and batch markings on the part, and a verification showing the part came from its manufacturer. For a manufacturer, the strongest setup puts an invisible mark on both the box and the part itself.
Why has this become a problem for service networks?
On 5 June 2026, OLAF announced that Portuguese authorities had seized 14,629 counterfeit truck parts worth more than €600,000. The haul included oil, fuel, air and cabin filters, bearings, valves, belt tensioners and brake cylinders. According to OLAF, the parts were made illegally in Türkiye and carried forged trademarks of well-known truck makers.
The picture inside Türkiye is similar. According to a July 2024 report in Türkiye Gazetesi, an Istanbul-led operation covering 16 firms in six provinces found 1,607,830 counterfeit and smuggled spare parts, with a declared value of about 721 million Turkish lira.
Demand is shifting as well. Ali Özçete, chairman of the Turkish automotive aftermarket association OSS, said most of the roughly 1.2 million vehicles sold in Türkiye in 2024 would leave warranty in 2026. Once a vehicle is out of warranty, parts decisions move beyond the authorised workshop, and the number of checkpoints grows.
What separates original, equivalent and counterfeit parts?
This distinction has to be clear at goods-in, because not every part without the manufacturer's box is a fake. Turkish competition rules offer useful definitions, and they mirror a distinction common in other markets.
| Definition | Basis | |
|---|---|---|
| Original part | Same quality as the parts used in vehicle assembly, made to the vehicle maker's technical specifications and production standards | Turkish Competition Authority Communiqué 2017/3 |
| Equivalent-quality part | Compared with the original and certified by an accredited body as meeting criteria such as mass, dimensions, material and function | Turkish Competition Authority Communiqué 2017/3 |
| Counterfeit part | Carries another brand's name or mark without authorisation | Subject of a trademark dispute |
The same communiqué lists preventing an authorised workshop from buying original or equivalent parts from a supplier of its choice among the restrictions that fall outside the block exemption. For warranty repairs, free servicing and recall work, however, the vehicle supplier may require its own original parts. Verification is therefore sometimes a warranty question as well as a brand protection one.
What does each workshop check show?
| Check | What it shows | Its limit |
|---|---|---|
| Invoice and supplier | Which chain the part came through | Does not verify the part itself |
| Box, label and print | Crude copies | A box can be swapped or copied |
| Dimensions, weight and finish | Obvious deviations | Needs a genuine reference |
| Approval mark and batch data | The claimed approval and production | Markings can be copied too |
| Invisible signature on the part | Whether the part came from the manufacturer | Does not measure quality or strength |
Brake linings are a good example. UN Regulation No 90 requires a replacement brake lining assembly to carry, permanently, the approval mark, the date of manufacture (at least month and year) or batch number, and the make and type. The package must also show the approval mark, the manufacturer's name or trade mark and the vehicles it is approved for. These markings tell the workshop where to look, but like any visible marking they can be copied.
Should the signature be on the box or on the part?
A visible design can be copied. An invisible signature cannot be seen, so a copier does not know what to copy. That logic holds for the box and for the part, and using both answers different questions:
- Signature on the box: lets staff read a shipment at goods-in without opening it.
- Signature on the part: can still be read after the part leaves its box, and even after removal from a vehicle.
- Both together: when box and part carry separate signatures, a different part placed in a genuine box stands out.
Choosing the position on the part is the hard bit. A friction surface wears, so on a brake lining the signature does not go there. On metal parts, reflection, coating, heat treatment and oil contact all affect the result. The decision comes from a trial on the part itself: apply the signature, read it, put the part through its later processes, then read it again. See which signature goes on which surface.
How should the workshop door routine work?
- Goods-in: incoming boxes are read in the warehouse, and shipments with negative results are set aside.
- Before fitting: for safety parts, the technician reads the part before installing it.
- Negative result: the part is not fitted. It is set aside, recorded with product, supplier and location, and reported to the manufacturer.
- Warranty claim: the removed part is read while the claim is assessed.
- Regional report: repeated failed readings from one supplier or region shape the inspection plan.
What are the limits of this check?
A signature shows the source of a part. It does not measure strength, material quality or performance; those belong to testing and the laboratory. An unsigned part is not automatically a fake either: it may be another manufacturer's equivalent part, or stock made before signature rollout. So a reading is a decision point for the workshop, and for legal proceedings it is a record that is not enough alone. The brand owner and its counsel assess the case.
What does Lumvex do here?
Lumvex uses a luminescent signature, invisible to the naked eye and used only for you, which can be applied to the surface of metal and hard plastic parts or to their box. Workshop and field teams get an on-the-spot result with a reader, and every reading is recorded with the product, place and person. See the automotive spare parts page for sector detail.
Sources
- OLAF: OLAF helps Portugal break counterfeit truck part trade, 5 June 2026
- Türkiye Gazetesi: Report on the counterfeit parts operation, July 2024
- Motor1 Türkiye: OSS shares its new year outlook, January 2026
- Turkish Competition Authority: Block Exemption Communiqué on Vertical Agreements in the Motor Vehicle Sector (2017/3), Official Gazette 24 February 2017, No. 29989
- EUR-Lex: UN Regulation No 90


