How secure is UV ink for spotting counterfeits?

Standard UV ink and the lamp that reveals it are easy to buy. An invisible mark is only as strong as its material, its reader and the record of each reading.

Invisible marking with UV ink is a useful first step for separating counterfeit products, but standard UV ink does not provide strong protection on its own: both the ink and the lamp that reveals it are easy to obtain. The security of an invisible mark depends on three things: being made with a material the counterfeiter cannot source, being distinguishable only with a defined reader, and every reading being recorded.

How does UV ink work?

According to EUIPO's anti-counterfeiting technology guide, UV-sensitive inks contain fluorescent pigments. They appear as one shade in daylight and change colour or disappear under ultraviolet light. The types used for invisible marking cannot be seen in daylight and appear only under UV. The guide notes that these pigments have been used to make paper for valuables and stamps since the 1960s.

Reading requires a light source. The Wood's lamp given as an example in the guide is a simple device that emits mainly ultraviolet light.

How do you spot a counterfeit with a UV lamp?

The suspicious product and a known genuine product are held side by side under the same lamp. On the genuine product a glow appears where the mark sits; on the counterfeit it either does not appear at all, or appears in the wrong place or the wrong colour.

The check is fast and needs no training. The answer it gives is crude: it tells you whether something glows under the lamp. It does not tell you whether what glows is your mark or any fluorescent ink sold on the market.

What are the weak points of standard UV ink?

  • Easy to source: Common UV inks are sold commercially. The EUIPO guide highlights resistance to copying only for rarer types: photochromic and multispectral "white" inks.
  • Easy to read: The reading device is also something anyone can buy. A counterfeiter can check their own copy with the same lamp.
  • Read by eye: A check under a lamp is not a measurement. The colour and intensity of the glow are interpreted differently by different people.
  • Background: Some papers and boards fluoresce by themselves. The difference between mark and surface shrinks, and reading gets harder.
  • No record: A check with a lamp is written down nowhere. Nobody knows how many suspicious products were met in which region.

None of these weaknesses makes a UV mark pointless. It does its job as a cheap, fast first screen, but it needs a second layer beside it.

What does a stronger invisible mark look like?

ISO 22383:2020 separates authentication technologies by how the check is made: with the human senses, with an authentication tool, or by forensic analysis. A UV mark falls into the second group, but within that group the differences in strength are large, and they show up in three places.

The first is the material. A mark made with an ink sold on the open market can be reproduced by anyone who buys the same ink. A formulation prepared for one brand and used on no other product is not available from any source the counterfeiter can reach. The EUIPO guide notes that rare ink types are hard to find and therefore hard to copy, and also that they cost more.

The second is reading. Any UV lamp shows that a mark is present. A defined reader that recognises the mark's own response tells you whether the right mark is there.

The third is the record. A result that appears on a screen and vanishes supports only the decision of that moment. When the result is written to a central record with the product, place, time and the person who read it, you can see in which regions suspicious products turn up and how often.

Where should the mark go?

The EUIPO guide points out that printing UV ink onto a product requires production processes to be adapted so the mark lands in the intended position. In practice the first decision is whether the mark sits on the outer carton or on a part that stays with the product.

Most invisible marks are applied to the outer carton, because the printing step is already there. A carton, however, can be swapped: empty cartons of a genuine product can be collected and filled with counterfeits, and a genuine product can be moved into a fake carton. In both cases the mark on the carton gives the wrong answer. For higher-risk products the mark is therefore also applied, where possible, to the product itself or to the inner packaging, label or cap that stays with it; when carton and product carry the same mark, a swap of either one shows up in the reading.

We covered how the surface affects the durability of a mark in which signature goes on which surface.

Where does the Lumvex signature differ from UV ink?

The Lumvex signature is also read with light; it differs on the three points above. The signature is used only on your products and appears on no other brand. It is invisible under everyday lighting and appears only under a defined source and with the right reader. When the reader is held to the product the answer comes on the spot, and every reading is recorded with the product, place and person.

The signature goes onto the product during your existing printing, coating or varnishing step; your line's speed and layout do not change. See the technology page for technical detail.

Sources

Meeting request

Let's determine the right signature for your product together.

The first meeting reviews your product, sales channels and the risks you face, and recommends a suitable method.

Request a meeting